Friction Stir Welding and Processing-7

Pages 354
Views 404
Size 15.2 MiB
Downloads 40
Friction Stir Welding and Processing-7

Tags:

TABLE OF CONTENTS

Friction Stir Welding and Processing VII
About the Editors …………………………………………………………………………………… ix
Friction Stir Processing
Microstructure Refinement and Homogenization of Non-deforming
Constituent Distributions during FSW/P ……………………………………………………..3
J. Woertz, S. Menon, and T. McNelley
Nano-Sized Grain Refinement Using Friction Stir Processing ………………………..9
B. Thompson, K. Doherty, J. Su, and R. Mishra
Fabrication of Carbon Nanotube Reinforced Aluminum Matrix Composites
via Friction Stir Processing………………………………………………………………………21
Z. Ma, Z. Liu, B. Xiao, and W. Wang
Flow Behavior of SiC Particles as Tracer Material during the Fabrication of
MMCs by Friction Stir Processing ……………………………………………………………29
Q. Shi, K. Sun, W. Wang, and G. Chen
Processing, Microstructure and Mechanical Property Correlation in Al-B4C
Surface Composite Produced via Friction Stir Processing …………………………… 39
M. Komarasamy, R. Mishra, J. Baumann, G. Grant, and Y. Hovanski
Friction Stir Welding: High Temperature
Materials – I
Comparison between Friction Stir and Submerged Arc Welding Applied to
Joining DH36 and E36 Shipbuilding Steel …………………………………………………49
S. Cater, J. Martin, A. Galloway, and N. McPherson
Friction Stir Welding of Pipeline Steels …………………………………………………….59
M. Mahoney, S. Sanderson, Z. Feng, R. Steel, S. Packer,
and D. Fleck
Microstructure and Properties of Friction Stir Processed HY80 Steel …………….71
G. Young, W. Stewart, M. Mahoney, R. Steel, J. Babb, S. Menon,
and T. McNelley
Mechanical Properties and Microstructural Characterization of a
Multilayered Multipass Friction Stir Weld in Steel ……………………………………..81
Y. Lim, S. Sanderson, M. Mahoney, D. Qiao, Y. Wang, W. Zhang,
and Z. Feng
Effect of Welding Parameters on the Microstructure and Mechanical
Properties of a Friction Stir Welded 11Cr-Ferritic/Martensitic Steel ……………..91
Y. Sato, H. Kokawa, Y. Yano, and Y. Sekio
Friction-Stir-Welding of Thick Carbon Steels Using a Co-Based Alloy Tool . 101
I. Sugimoto, A. Sato, S. Park, S. Hirano, S. Imano, Y. Sato,
H. Kokawa, T. Omori, and K. Ishida
Establishing W-Based Friction Stir Welding Tool Life for Thick Section
Steel Applications …………………………………………………………………………………107
M. Eff, B. Thompson, S. Babu, and T. Leonhardt
Assisted Friction Stir Welding of Carbon Steel: Use of Induction and Laser
as Preheating Techniques……………………………………………………………………….117
A. Álvarez, V. Cid, G. Pena, J. Sotelo, and D. Verdera
Influence of Heat Input on Friction Stir Welding for the ODS Steel MA956 ..127
B. Baker, L. Brewer, E. Menon, T. McNelley, B. El-Dasher,
S. Torres, J. Farmer, M. Mahoney, and S. Sanderson
Friction Stir Welding: High Temperature
Materials – II
Microstructural and Mechanical Investigations of Friction Stir Welded
Ti/Ti- and Ti-Alloy/Ti-Alloy-Joints ……………………………………………………….. 141
N. Buhl, G. Wagner, D. Eifler, M. Gutensohn, and F. Zillekens
Microstructure and Mechanical Properties of FSW Lap Joint between Pure
Copper and 1018 Mild Steel Using Refractory Metal Pin Tools ………………….151
M. Shamsujjoha, B. Jasthi, M. West, and C. Widener
Friction Stir Welding: Light Materials – I
Effect of Tool Pin Features and Geometries on Quality of Weld during
Friction Stir Welding …………………………………………………………………………….163
M. Reza-E-Rabby, W. Tang, and A. Reynolds
Effect of Friction Stir Processing on Armor Grade Materials ……………………..173
T. Johnson, T. Curtis, B. Jasthi, E. East, C. Widener, and M. West
Analysis of Mechanical and Metallurgical Properties of Friction Stir Butt
Welded AA2024 …………………………………………………………………………………..183
S. Jurak, D. Burford, and M. McCoy
Mechanical and Microstructural Properties of FSW Lap Joints …………………..195
E. Aldanondo, E. Arruti, P. Alvarez, and A. Echeverria
Mechanical Properties of Repaired 7075-T73 Friction Stir Weld
Butt Welds …………………………………………………………………………………………..205
C. Widener, J. Franklin, B. Jasthi, and M. West
Process Development of Integral Fasteners Using Friction Stir Spot
Welding with “C-Frame” End Effector on an Aircraft Cabin Door Made
from AA6061-T6 and AA2024-T3………………………………………………………….215
A. Handyside, V. Iyer, R. Preston, E. Boldsaikhan, and M. McCoy
Effect of Post-weld Aging on the Corrosion Resistance and Mechanical
Properties of Friction Stir Welded Aluminum Alloy 7475-T73 …………………..225
B. Jasthi, E. Klinckman, T. Curtis, C. Widener, M. West,
R. Ruokolainen, and A. Dasgupta
Friction Stir Welding: Light Materials – II
On Friction Stir Welding of Mg-Zn-RE-Rr Alloy Using Threaded Tools for
Aerospace Application …………………………………………………………………………..237
S. Madavan, M. Mahapatra, and P. Kumar
Magnesium Based Surface Composite via Friction Stir Processing ……………..245
S. Das, R. Mishra, K. Doherty, K. Cho, B. Davis, and R. DeLorme
Effect of Initial Microstructure on the Microstructural Evolution and Joint
Efficiency of a WE43 Alloy during Friction Stir Welding ………………………….253
S. Palanivel, R. Mishra, B. Davis, R. DeLorme, K. Doherty,
Microstructure in Dissimilar Friction Spot Weld of Al to Mg Alloys
Observed by Stop-Action Technique ……………………………………………………….263
U. Suhuddin, V. Fischer, and J. dos Santos
Optimization of Wear Rate of Friction Stir Welded Al-B4C Composite ……….271
K. Kalaiselvan, and N. Murugan
Friction Stir Welding and Processing: Modeling and
Controls
Three-Dimensional Visualization of Metallic Flow and Control of FSW
Joint Properties Using New FSP Technique ……………………………………………..279
H. Fujii, Y. Morisada, and T. Imaizumi
System Parameter Identification for Friction Stir Processing ………………………289
D. Marshall, and C. Sorensen
Advances in Temperature Control for FSP ……………………………………………….301
K. Ross, and C. Sorensen
Analysis of Tool Feedback Forces and Material Flow during Friction
Stir Welding …………………………………………………………………………………………311
E. Boldsaikhan, and M. McCoy
Paradigm Shift in Control of the Spindle Axis ………………………………………….321
K. Ross, and C. Sorensen
A Coupled Thermal/Material Flow Model of Friction Stir Welding Applied
to Sc-Modified Aluminum Alloys …………………………………………………………..329
C. Hamilton, M. Kopyscianski, O. Senkov, and S. Dymek
Material Flow and Texture in Friction Extruded Wire ……………………………….339
X. Li, W. Tang, and A. Reynolds
Application of Acoustic Emission Technique to Monitor Friction Stir
Welding Process to Produce Defect Free Welds ……………………………………….349
B. Rajaprakash, C. Suresha, and S. Upadhya
Author Index ………………………………………………………………………………………..359
Subject Index ……………………………………………………………………………………….361