Tech Books Yard have 650 Electronics for Free Download

If a single diode in a center-tapped full wave rectifier opens, the output is

  • A. 0 V
  • B. half-wave rectified
  • C. reduced in amplitude
  • D. unaffected
  • Correct Answer: Option B

In a semiconductor, the two bias conditions are

  • A. positive and negative
  • B. blocking and non-blocking
  • C. open and closed
  • D. forward and reverse
  • Correct Answer: Option D

The voltage across a forward biased silicon diode is

  • A. 0.7 V
  • B. 0.3 V
  • C. 0 V
  • D. dependent of bias voltage
  • Correct Answer: Option A

The rectification efficiency tells us what percentage of total input power is converted into useful dc power

  • A. True
  • B. False
  • Correct Answer: Option A

The rectification frequency of a full-wave rectifier is

  • A. 40%
  • B. 40.6%
  • C. 80%
  • D. 81.2%
  • Correct Answer: Option D

In a full-wave rectifier, the current in each of the diodes flows for

  • A. the complete cycle
  • B. half-cycle of the input signal
  • C. less than half of the cycle
  • D. zero time
  • Correct Answer: Option B

In a half-wave rectifier, the load current flows for

  • A. the complete cycle
  • B. the positive half-cycle
  • C. less than half of the cycle
  • D. more than half-cycle but less than the complete cycle
  • Correct Answer: Option B

The forward bias applied to a pn junction diode is increased from zero to higher values. Rapid increase of the current flow occurs when

  • A. immediately
  • B. only after the forward bias has exceeded the potential barrier
  • C. when the flow of minority carriers is sufficient to cause an avalanche breakdown
  • D. none of the above
  • Correct Answer: Option B

When a pn junction is forward biased,

  • A. only holes in the p region are injected into the n region
  • B. only electrons in the n region are injected into the p region
  • C. majority carriers from each region are injected into each other
  • D. no carriers move
  • Correct Answer: Option C

Avalanche breakdown occurs when

  • A. forward current exceeds a certain value
  • B. reverse bias exceeds a certain value
  • C. forward bias exceeds a certain value
  • D. the potential barrier is reduced to zero
  • Correct Answer: Option B